Timepiece i birk.

Specifications: (1) 8-inch Aluminum-cone woofer in Hybrid Reflex enclosure & (1) Waveguide loaded, 1-inch fabric dome tweeter. Standard Finish: Satin Paint. Premier Finishes w/ custom hardwood and/or veneer species and/or mirror-gloss finish available upon request. Impedance 8-Ohms Sensitivity 85dB@1W/1M Frequency Response (anechoic) 30Hz-22KHz +/- 2dB -3dB Points (anechoic) 30Hz & 24KHz Bass Alignment Proprietary 4th order Hybrid Reflex Power Handling (Long Term) 125 Watts (I.E.C. 268-5) Power Handling (Short Term) 300 Watts (I.E.C. 268-5) Crossover Type 4th order L-R Acoustic @ 600Hz Dimensions 21.5"H x 12.5"W x 15.75"D Weight 65 lbs. Each

Sælges for kunde.

Kunden har købt A-T The Mummy.

The Nuforce Icon HDP incorporates a full-speed USB DAC (24bit/96kHz) and full-function S/PDIF D/A converter (24bit/192kHz), plus a headphone-amplifier circuit and preamp output. Supporting digital USB, S/PDIF in coaxial and 3.5mm optical (3.5mm) modes, along with an analog line input, the HDP accommodates all manner of audio devices. The Icon HDP, which has been designed to serve as the heart of a high-performance audio system, competes head-on with DACs and preamps costing several times its price. Note: The Icon HDP employs the same DAC as our high-end CDP-8 (MSRP $1450.00) and a preamp similar to that of the P-8S (MSRP $1650.00). The following design features contributed to the stellar performance of the Icon HDP: The digital input has no capacitors in its signal path. The analog input utilizes a single DC-decoupling capacitor. Components along the signal path are minimized. The 24/96 USB interface outputs a I2S signal to a high-quality DAC. The digital circuit occupies a separate daughter board. The DAC chip consists of four internal 24/192kHz DACs that provide a fully differential and balanced output. The differential signal's DC offset operates without a need for decoupling caps. Digital and analog voltages each have separately isolated internal power regulations.

Specifications.

Analog Inputs RCA or 3.5mm when inserted Digital input S/PDIF - Coaxial or 3.5mm Optical when inserted. Coaxial up to 192kHz/24-bit or Optical up to 192kHz/24-bit Coaxial input impedance 75 Ohm USB DAC USB 1.0 and 1.1 up to 44.1kHz/16-bit, USB 2.0 Full-Speed up to 96kHz/24-bit 88.2 kHz is not supported RCA Output 2.6 Vrms (cuts off when headphone is inserted) Output impedance 100 Ohm Headphone Output 6.3mm full-size headphone output jack drives headphones up to 600-Ohm (96 mW@600-Ohm) Output impedance 10 Ohm Headphone power spec: 288mW rms @ 30 Ohm 210mW rms @ 120 Ohm 152mW rms @ 300 Ohm 123mW rms @ 500 Ohm 96mW rms @ 600 Ohm 59mW rms @ 1200 Ohm 43mW rms @ 1700 Ohm 35mW rms @ 2000 Ohm THD+N 0.001% @ 1kHz. Frequency response 10Hz to 100kHz (-0.5dB). SNR > 100dB Power Requirement 12-15V, 1.6A, 100-240VAC (Worldwide AC). Dimension 6" x 4 1/2" x 1". Weight 1 lb.