Specifications:

(2) 8-inch Aluminum-cone woofers in Hybrid Reflex enclosure & (1) Waveguide loaded, 1-inch fabric dome tweeter.

Impedance 4-Ohms Sensitivity 88dB @ 1W/1M – 91dB @ 2.83V/1M.

Frequency Response (anechoic) 25Hz-22KHz +/- 2dB -3dB Points (anechoic) 24Hz & 24KHz. Bass Alignment Proprietary 4th order Hybrid Reflex.

Power Handling (Long Term) 250 Watts (I.E.C. 268-5) Power Handling (Short Term) 600 Watts (I.E.C. 268-5).

Crossover Type 4th order L-R Acoustic @ 700Hz.

Dimensions 53.75"H x 12.5"W x 15.75"D.

Weight 163 lbs. Each.

Specifications.

Type: Three-way, four driver loudspeaker with transmission line woofers

Frequency Response: 25Hz to 50kHz

Sensitivity: 91.5dB/W/m

Nominal Impedance: 4 ohms

Dimensions: 10 x 19 x 47 (WxDxH in inches)

Weight: 110 lbs.

Anmeldelser: www.enjoythemusic.com/superioraudio/equipment/0105/meadowlarkblueheron.htm

Tekniske specifikationer.

Frekvensområde: 28 – 32.000 Hz

Følsomhed: 91 dB ved 1 watt, 2.83 V

Nominel Impedans: 4 ohm

Mål: 118 cm høj, 23 cm bred og 45 cm dyb Vægt: ca. 55 kg.

Anmeldelser.

www.hifi4all.dk/content/templates/anmeldelser.asp

NuForce IA-7 V3.

100Wx2 The NuForce IA-7 V3 is an integrated stereo amplifier with remote control. Because the IA-7 V3 shares the same circuit board as our Reference Series amplifiers, it offers exemplary performance at a most attractive price. The unit is housed in a black or silver sand-blasted anodized aluminum case. We provide control knobs in black and silver for user mixing-and-matching. Heat Dissipation: In order to achieve superior heat dissipation, the IA-7 V3's internal amplifier board has been designed to conduct heat directly to the top cover instead of the bottom chassis, which is why the IA-7 V3's top cover will be hotter to the touch than other parts of the chassis. After prolonged use, the IA-7 V3 top cover's temperature can reach 54 degree C. This is not a problem. To the contrary, the design provides the internal components with longer-term reliability.

CD Player CDP-8 The CDP-8 CD Player once again demonstrates NuForce's redefinition of audio-playback standards and value. We conceived the CDP-8 for Red-Book CD playback exclusively in order to avoid the pitfalls and compromises to which so-called universal players are prone. In recent years, advances in technology have resulted in clearly audible refinements in CD playback. However, preferring to keep abreast of newer formats, most manufacturers have declined to put their best efforts into CD playback, preferring to assume - against all evidence -- that the compact disc is obsolete. We at NuForce emphatically disagree. Public and private music libraries consist in the main of compact discs. It doesn't take much insight to recognize that people with expensive CD collections are unlikely to replace them with other formats any time soon, even assuming that the vast array of CD titles will ever reappear in these other formats. Common sense tells us that collectors will much prefer to avail themselves of the advances in CD playback the NuForce CDP-8 exemplifies. What is it, then, that makes the CDP-8 better? For a start, our player employs a state-of-the-art optical drive system and powerful DSP-based decoder that fully implements Red Book error-correction capabilities. This feature alone offers a clear advantage over other strategies. Our custom-designed DSP directs the laser servo to correct errors, thus negating data corruption before it becomes an issue. Until now virtually all CD transports have been essentially "dumb" in that their optical drives lack the ability to recognize disk error, however minor. They simply output data, good and bad, until major problems appear. We have all experienced how scratched CDs can stutter and skip. Only when the transport encounters big-time errors does it attempt to detect the disc's playable areas. This approach embodies a dilemma: before the transport encounters and responds to significant errors, it passes along numerous smaller errors to the next stage, at which point an error-correction algorithm attempts to reconstruct the lost data Further complicating the process, the master-clock signal synchronizing the circuit has to be derived from the data stream as it's retrieved from the disk. The aforementioned small errors cause even greater problems by amplifying jitter throughout the digital-to-analog process. Is it any wonder that CDs have been largely unable to provide the level of playback quality they're capable of? Further, is it any wonder that many audiophiles shun the format to this very day? In contrast to other procedures, the CDP-8's transport, which runs at a single speed, includes a memory buffer that temporarily stores the disc's data. This procedure permits data re-clocking that the on-board Master-Clock resynchronizes. The laser servo's DSP control has significantly reduced jitter, further system-data synchronization is no longer dependant on the original data stream's accuracy. Jitter and its accompanying distortion have been reduced to a matter of little consequence. The CDP's novel and groundbreaking design concepts result in a level of playback that rivals or surpasses that of any other player on the market today. This holds true even when compared to the implementation of a computer as a CD drive/music server. Simply put, a computer cannot read a CD in its native format, thereby making it difficult -- and costly -- to recover CD data in the manner of a straightforward CD Player. The CDP-8's output provides the finishing masterstroke: a high-performance DAC and sophisticated analog output circuit process the final decoding. Finally, as an attractive ergonomic feature, a touch-sensitive strip controls the CDP-8's command functions, thus avoiding the need for mechanical switches or push buttons. The included remote coordinates volume and input functions with NuForce's P-9 Preamp and IA-7 Integrated amp. Compared to other CD-playback devices, the NuForce CDP-8 offers an unprecedented level of performance and value. Not only do we make your CD collection and the investment it represents viable for years to come, we do so at a most attractive price. Top-quality, affordable, dedicated CD playback from a no less dedicated company - now there's a concept whose time has arrived!

Specifications.

•Maximum output level: analog RCA, 2.7V

• S/PDIF output: RCA and BNC

• Frequency response: 20Hz-20kHz, @ +/- 0.3dB.

• Signal/noise ratio: >100dB.

• THD: 0.005% at 1kHz, 0dBFS

• Output impedance: 100 ohms

• Dimension: 8.5" x 14" x 1.8"

• Weight: 7

anmeldelse Stereophile:

www.stereophile.com/content/nuforce-cdp-8-cd-player

Specifications.

 Power 250 watts per channel — 8 ohms

500 watts per channel — 4 ohms

1000 watts per channel — 8 ohms (monobloc)

Distortion Rated THD and IM less than 0.01% rated power

Damping Factor over 2000

Peak Current 64 amperes

Inputs Unbalanced stereo Balanced only for monoblock Input

Sensitivity 1.98 volts of rated power Input

Impedance 50,000 ohms

Hum and Noise over 100 dB

Crosstalk over 60 dB

Frequency Response 0.2 to 100,000 Hz

Dimensions 432mm W x 133mm H x 420mm D

Shipping Weight 30 Kg Power Rating 240 VAC

Specifications.

Power 125 watts per channel at 8 ohms

250 watts per channel at 4 ohms

500 Watts per channel 8 ohms, monobloc configuratio

Distortion Rated THD and IM less than 0.1% rated power

Damping Factor over 1000

Peak Current over 30 amperes

Input Sensitivity 1.40 volts of rated power

Input Impedance 100,000 ohms

Hum and Noise over 100 dB A

weighted Crosstalk over 60 dB

Frequency Response 0.2 to 100,000 Hz

Dimensions 432mm W x 133mm H x 330mm D

Shipping Weight 22 Kg's Power Rating 240 VAC @ 50hz

Specifications.

Power 20 to 20,000 Hz 125 watts per channel — 8 ohms

225 watts per channel — 4 ohms

Distortion THD and IM less than .1% rated power

Damping factor over 200

Peak Current over 15 amperes

Input Sensitivity 1.27 volts of rated power Input

Impedance 100,000 ohms

Hum and Noise over 100 dB A

weighted Crosstalk over 50 dB

Frequency Response 3 dB power bandwidth in 8 ohms (0.2 to 70,000 Hz)

Dimensions 17" W x 6.25" H x 13" D

Shipping Weight 33 lbs

Power Rating 120 VAC, 5A slo-blo fuse (240 VAC optional)

The 21A is a single-box remote-controlled line-stage-only preamp that uses two matched pairs of 12AU7 tubes. It has higher-than-average gain, 17dB, which may cause some background hiss with high-gain amps. It has single-ended inputs, and single-ended and balanced outputs (it is not a fully balanced unit), all via heavy gold-plated connectors

Inputs (5) unbalanced stereo Outputs (all connections gold-plated) (1) unbalanced stereo main output (1) balanced stereo main outout (1) unbalalced stereo tape output Distortion THD and IM 0.05% Noise 90 dB a weighted Input Impedance 50,000 ohms Controls Listen, Record, Volume, Balance — gold-plated knobs Power and Mute — push buttons Remote Controls Power, Mute and Volume Frequency Response 0.5 to 200,000 Hz within 3 dB

Features Integrated CD-player Front loading mechanism Rubber insulated aluminium feet Philips VAM 1202 CD-mechanism 192/24 digital upsampling Double DAC in mono configuration Balanced analogue stage with balanced and unbalanced output

Specifications

Channel Separation Better than 110dB Conversion Rate 192kHz, 24-bit Digital to Analog Conversion Dual differential 24-bit DACs Dynamic Range 96dB (10Hz-30Hz) Frequency Response 10Hz - 20kHz, +0dB, -0,3dB Intermodulation Distortion Less than 0.01% Mains Voltage 100V, 120V, 220V, 240V, factory set for destination country Maximum Output (0dBFS) 3.66V balanced 1.83V single-ended Output Complement 2 male XLR balanced audio outputs 2 RCA single-ended audio outputs Output Impedence 110 ohms Power Consumption 25 watts maximum Chassis Size 43,5 x 35 x 8.5 cm Weight (with envelope) 12 Kg

The VZN-100 monobloc amplfiers are our original core design and are 100 watt materpieces. Seen at hi-fi shows for years, and garnering great praise we might add, the Marquis are simply perfect for moderate size systems and speakers. They deliver amazing punch along with a transient speed that is breathtaking while remaining unfatiguing for the committed listener. Highly resolving and harmonically full, this amplifier begat the Joule reputation for performance, beauty, and value. It is a beautiful amplifier in the fullest sense of the word. Available in standard construction or music-wood with automotive finish.

Specifications

Per Channel Tubes 6 - 6C33CB's Triode (Output)

2 - 6350's Dual Triode (Driver)

1 - 12AX7's Dual Triode

2 - 6DJ8's (Differential Mu Stage)

Power Supplies 2

- Regulated Filament Supplies

1 - Regulated Driver B+ Supply

1 - Driver Negative Supply

2 - Floating Driver Bias Supplies

2 - Floating Driver B+ Supplies

1 - Driver Filament Supply

1 - Floating Meter Supply

Power Output 100 watts Class A into 8 Ohms

80 watts Class A into 4 Ohms

Output Stage Single-ended asymmetrical Class A

Power Requirement 400 watts each monoblock

Weight 40 lbs. each

Dimensions Width - 12 inches Height - 9 inches Depth - 18 inches

Features.

1 x 150 Watts (Three M monoblock).

 Single-ended phono inputs and balanced XLR inputs Dual speaker terminals for bi-wiring (Three M monoblock)

Efficient heat dissipation via internal chassis-coupled heatsinks

Sleek, slim-line brushed aluminium face plate mounted to non-resonant heavy-gauge black powder-coated steel chassis with no visible screws.

Features .

2 x 40 Watts (Orpheus Three S stereo)

Single-ended phono inputs and balanced XLR inputs Dual speaker terminals for bi-wiring (Three M monoblock)

Efficient heat dissipation via internal chassis-coupled heatsinks

Sleek, slim-line brushed aluminium face plate mounted to non-resonant heavy-gauge black powder-coated steel chassis with no visible screws.

Features.

2 x 40 Watts Preamplifier bypass (unattenuated throughput) option for use as power amplifier 1 balanced XLR input, 4 single-ended phono inputs Low-noise relay input switching 80-step volume control in precise 0.5 dB increments 40-step relative level adjustment for each input in 0.5 dB increments Intuitive menu-based operation Channel balance control Efficient heat dissipation via internal chassis-coupled heatsinks User-selectable input names up to 10 characters User-adjustable display lighting (100%, 75%, 50%, 25%,OFF) Sturdy, shock-proof remote control with aluminium front and metal chassis and intuitive layout Sleek, slim-line brushed aluminium face plate mounted to non-resonant heavy-gauge black powder-coated steel chassis with no visible screw.

pecifications.

Five line inputs fully functioning remote

Tape output, A/V bypass, 2 stereo outputs Class A discrete component circuitry

Frequency response 0.2 Hz to 100KHz

Distortion less than .001%

Size 305mm W x 216mm x D 52mm H High quality components

Specifications.

65W (Rms) per channel @ 8 ohms

Damping factor over 500

Current delivery >16 amps

12 volt turn-on trigger

High quality components

Size 305mm W x 216mm x D 90mm H

The Nuforce Icon HDP incorporates a full-speed USB DAC (24bit/96kHz) and full-function S/PDIF D/A converter (24bit/192kHz), plus a headphone-amplifier circuit and preamp output. Supporting digital USB, S/PDIF in coaxial and 3.5mm optical (3.5mm) modes, along with an analog line input, the HDP accommodates all manner of audio devices. The Icon HDP, which has been designed to serve as the heart of a high-performance audio system, competes head-on with DACs and preamps costing several times its price. Note: The Icon HDP employs the same DAC as our high-end CDP-8 (MSRP $1450.00) and a preamp similar to that of the P-8S (MSRP $1650.00). The following design features contributed to the stellar performance of the Icon HDP: The digital input has no capacitors in its signal path. The analog input utilizes a single DC-decoupling capacitor. Components along the signal path are minimized. The 24/96 USB interface outputs a I2S signal to a high-quality DAC. The digital circuit occupies a separate daughter board. The DAC chip consists of four internal 24/192kHz DACs that provide a fully differential and balanced output. The differential signal's DC offset operates without a need for decoupling caps. Digital and analog voltages each have separately isolated internal power regulations.

Specifications.

Analog Inputs RCA or 3.5mm when inserted Digital input S/PDIF - Coaxial or 3.5mm Optical when inserted. Coaxial up to 192kHz/24-bit or Optical up to 192kHz/24-bit Coaxial input impedance 75 Ohm USB DAC USB 1.0 and 1.1 up to 44.1kHz/16-bit, USB 2.0 Full-Speed up to 96kHz/24-bit 88.2 kHz is not supported RCA Output 2.6 Vrms (cuts off when headphone is inserted) Output impedance 100 Ohm Headphone Output 6.3mm full-size headphone output jack drives headphones up to 600-Ohm (96 mW@600-Ohm) Output impedance 10 Ohm Headphone power spec: 288mW rms @ 30 Ohm 210mW rms @ 120 Ohm 152mW rms @ 300 Ohm 123mW rms @ 500 Ohm 96mW rms @ 600 Ohm 59mW rms @ 1200 Ohm 43mW rms @ 1700 Ohm 35mW rms @ 2000 Ohm THD+N 0.001% @ 1kHz. Frequency response 10Hz to 100kHz (-0.5dB). SNR > 100dB Power Requirement 12-15V, 1.6A, 100-240VAC (Worldwide AC). Dimension 6" x 4 1/2" x 1". Weight 1 lb.