NuForce IA-7 V3 100Wx2. The NuForce IA-7 V3 is an integrated stereo amplifier with remote control. Because the IA-7 V3 shares the same circuit board as our Reference Series amplifiers, it offers exemplary performance at a most attractive price. The unit is housed in a black or silver sand-blasted anodized aluminum case. We provide control knobs in black and silver for user mixing-and-matching. Heat Dissipation: In order to achieve superior heat dissipation, the IA-7 V3's internal amplifier board has been designed to conduct heat directly to the top cover instead of the bottom chassis, which is why the IA-7 V3's top cover will be hotter to the touch than other parts of the chassis. After prolonged use, the IA-7 V3 top cover's temperature can reach 54 degree C. This is not a problem. To the contrary, the design provides the internal components with longer-term reliability.

Specifications.

•Power Output: 100W x 2 with 24,000uF of capacitance using 200W SMPS

•325W peak power at 8 ohms.

•Freq. Response: 20 Hz -0.3dB to 120 kHz -3dB •THD+N = 0.01%, 1kHz, 10W, 4 ohm load •Input sensitivity for 1W @ 8 ohms = 400mV

•Input impedance at 1kHz = 2K ohms •Remote input selection and volume control with memory (last selection, volume level)

•Digitally-controlled switched attenuator. Volume Range: +30dB to -70dB with 0.5dB steps

•Audio Inputs: 4 sets of RCA inputs (1 set can be configured as pre-out)

•Audio Outputs: 1 set of RCA preamp output jacks (only 3 sets of RCA inputs are available if this is configured)

•Speaker Binding Posts accept spade lugs or banana plugs.

•Chassis is 100% high-grade, brushed and anodized aluminum to reduce audio resonance

•Dimensions: 1.75"H x 8.5"W x 16"D

•Weight: 9 lbs.

•Power Requirements: Worldwide 90-240VAC, auto select

Digital Input Amplifier The NuForce Dia Integrated Amplifier fits your digital lifestyle without the complexity. The NuForce Dia accepts audio input from your favorite consumer electronics products via its optical or coaxial digital input and converts the signal to high-quality audio using its 24bit/192kHz D/A converter. Dia's high-performance 24W stereo power amplifier drives powerful, crystal-clear sound through your existing speakers for ultimate audio performance from your: Wide screen and high-definition TVs Satellite receivers and set-top boxes Gaming consoles Blu-Ray/DVD/CD players Media streaming devices like Airport Express and Apple TV By performing high-quality digital-to-analog conversion separately, Dia adds a new level of realism and exquisite detail to virtually every component you may already own—without any additional receivers or peripherals. For example, by connecting your flatscreen TV's digital audio output to Dia driving your pair of high-quality speakers (including an optional subwoofer), you can get high-performance stereo sound without having to set up a home-theater receiver. You also can connect any wireless media streaming devices such as Airport Express and Apple TV to Dia and a pair of speakers to form a compact, high-performance wireless system that fills the room with sound. Whatever component you want to plug in for exquisite audiophile-quality sound—without the bulky receiver—Dia translates the digital audio signal to analog sound via high-quality 24-bit D/A converters that operate exclusively at the data's native sample rate for maximum clarity and detail.1 1The maximum sample rate currently supported is 24-bit/192kHz. Features 1 pair industry-standard Toslink fiber-optic inputs, 1 coaxial-S/PDIF input S/PDIF inputs up to 24-bit/192kHz Audiophile-grade D/A converter for low noise and clarity The absence of capacitors in the signal path allows for heightened purity, lower distortion, a wider, deeper sound-stage and better-detailed imaging. High-performance, digital-controlled volume pot with remote control High-efficiency analog switching-amplifier technology for low power consumption, without digital artifacts. Ultra high-speed switching frequency for high resolution Apple, AirPort Express, Apple TV are trademarks of Apple Inc., registered in the U.S. and other countries.

Specifications.

Input RCA analog maximum 2Vrms USB DAC: USB 1.1, 2.0 compatible. USB native bit rate: 32, 44.1, 48, and 96 kHz, 24-bit Maximum sampling rate: 96kHz Resolution: 24-bits 3.5mm Stereo Speaker Outputs (RJ45 connectors with 15 micron thick gold plating). NuForce RJ45 to banana plug speaker cables (2m) are provided with NuForce Icon-2. Headphone Output Power output: 80mW x 2 @ 16-Ohm THD+N 0.05% Line Out (for Subwoofer) connection Output: Peak power: 30W x 2 (4 Ohm) Output power at 1% THD+N, A-weighted: 24W x 2 (4 Ohm), 18W x 2 (8 Ohm) Gain: 22.2 dB THD+N: 0.02% Frequency Response: 20 to 20kHz +/- 1dB SNR > 90dB A-weighted DC requirement: 12-15V, up to 60W; 60W 100-240VAC worldwide voltages PSU is included. Dimension: 6" x 4 1/2" x 1" Weight: 1 lb. Shipping weight 5 lb.

Specifications:

Four line inputs........ 1 stereo rca output

Freq Response ...0.2 Hz to 125KHz - 3 dB

Freq Response .... .20 Hz to 20KHz - 1 dB

Input Imped.............................100K ohms

Distortion......IM and THD..less than .001%

Noise.... .......less than 300 microvolts rms

Crosstalk...................................Over 45Db

Peak Current............................ 32 amperes

Damping Factor.......................... over 2000

Shipping Weight.........................19 Kg each.

Size.................432mm x 88.9mm x 330mm.

Specifications.  

•Inputs 5 pairs of rca's plus 1 monitor pair rca

•Outputs 1 pair of rac pre-ampilifier

•Power rating 125W (Rms) per channel @ 8 ohms

•Power rating 250W (Rms) per channel @ 4 ohms

•Damping factor over 2000 @ 1Khz

•Current delivery >30 amps

•Input sensitivity 0.43 VRMS for rated power

•Crosstalk over 60dB

•Noise over 100 dB A weighted

•Input Impedance 100K omhs

•weight 12kg's

•Size 432mm W x 102mm x H 305mm D

Trends Audio introducerer en mini klasse-T stereo forstærker - TA10.2, som kan levere op til 2x15W med den inkluderede strømforsyning. På grund af Tripath's klasse-T Digital Power Processing (TM) teknologi, og vores speciale teknikker i printdesign og komponent valg, kan TA10.1 opnå HIFI lydkvalitet, men til en meget overskuelig pris. TA10.2 yder på mange punkter som en klasse AB forstærker med high fidelity og varm lyd, imens strømforbrug og størrelse er mere som en klasse-D forstærker. Selvom dens maksimum udgangseffekt kun er på 2x15W, kan TA10.2 alligevel godt drive gulvhøjttalere med tilstrækkelig god kontrol over bassen. Den har ingen problemer ved almindeligt hjemmebrug.

Features.

Applied the proprietary T-amp technology for audiophile quality sound, high power efficiency (90%) and less heat generation compact design (mini-size & light weight), easy portable and setup provide up to 2x15W output an AC adaptor is bundled for continuous power supply. separated amplifier & AC adaptor design to minimize mutual interference and flexible to apply other power sources, e.g. lead-acid battery. standard gold-plated audio and speaker sockets used to be compatible with most audiophile quality cables. applied the specially designed audiophile-grade “Trends” MKP capacitors as audio input decoupling capacitor which guarantee the best original audio signal feed into the amplifier. [Trends TA-10.2 Series only] applied the lowest LSR & highest ripple current Rubycon MCZ series tank capacitors as the power filtering capacitor which best suit the switching PWM characteristic of class T (class-D) amplifier. [Trends TA-10.2 Series only] applied the smaller yet better quality ALPS 9mm sealed volume pot which provide better sound in the volume control [Trends TA-10.2 SE only] provided the option of TA-10.2P (Power Amplifier edition) which cancelled the volume pot and simplified the front panel for those who always apply it with Trends PA-10 or other pre-amplifier for audio selection & volume control. Re-organized the sockets layout of the back panel which provides a more convenient audio cable and speaker cable connections. [Trends TA-10.2 Series only] enhanced the chassis with beautiful satin finish and smarter black/white contrast. [Trends TA-10.2 Series only] the DC bias between speaker terminals can be offset (close to ±0mV) by adjusting the potentiometers (factory pre-set). It suppresses the "pop" sound when power on/off and also increase the sound purity. option to work as a pure power amp by simply reset jumpers to by-pass the volume controlling circuit built-in over-current protection built-in over-temperation protection audiophile-graded parts and components air-core inductor used (instead of magnetic-core) for better sound the stylish & specially-plated aluminium case provides not only good-looking, and also provides outstanding shielding capability.