Belles Aria

17.490 kr.

The Belles Aria Integrated Amplifier

Hi-Fi Choice Recommended

HIFI4ALL skriver.

“Jeg har faktisk stor respekt for Belles, for de kan få udstyr til, at lyde rigtig godt, uanset pris. Og de tør godt indgå nogle små kompromisser for, at fokusere på det vigtige: Musikken! Og Aria’s stærkeste kort er præcis, at den kan få én til, at glemme udstyret, så man netop bare nyder musikken, som er den det mest naturlige i verden. Det er der ikke mange forstærkere, der kan prale af…”

The old adage that the shortest distance between two
points is a straight line has application in the realm of
high‐end audio. When the distance between the
various components necessary to reproduce a clean,
accurate audio performance is straight and direct, the
results can be truly amazing.
The Belles Aria Integrated Amplifier provides an
analog experience and all of its virtues in one simple,
physical enclosure. All the functional components
necessary to create that performance: phono, line,
headphone, and power stages, are in straight‐line
proximity to one another. The one enclosure
performing these many functions eliminate the need
for an extra chassis and interconnect cables.
The Belles Aria is state‐of‐the‐art is its design. The
unit’s phono, headphone, and preamplifier stages use
Burr‐Brown amplifiers, known in pro circles for their
ultra‐low distortion characteristics. The power
amplifier is a discrete, fully‐complimentary design
utilizing mosfet transistor output stages. The unit is
capable of producing 75 watts per channel into 8
ohms.
The Belles Aria Integrated Amplifier is the shortest
distance between you and pure audio enjoyment.
Key Features of the Belles Aria Integrated
Amplifier
A manual and remote controlled Alps volume
controlled potentiometer.
A moving magnet phono stage section using
Burr Brown amplifiers for ultra‐ low distortion.
The precision resistor and polypropylene
capacitor equalization network allows for an
accurate RIAA curve result.
The preamplifier line stage section is powered
by a Burr Brown OPA551 professional
amplifier. The OPA551 is a hallmark in the
professional audio field, exceeding all others of
its type. It is capable of driving up to 200
milliamperes of current and can operate from
up to + or – 30 volts of power. This enables it
to perform the preamplifier function with low
distortion, wide bandwidth, and also drive
headphones effortlessly.
A discrete fully complimentary power amplifier
using a power mosfet transistor output stage.
The amplifier produces 75 watts per channel of
clean power into 8 ohms.
1 moving magnet phono and 3 line inputs.
A power amplifier bypass so that the power
amplifier can be accessed directly from
another source without going through the pre
amplifier.
Black or Silver front panel finishes available.

Specifications:
The Belles Aria Integrated Amplifier specifications are as follows:
Power Amplifier Section:
Power Rating: …………. 75 watts into 8 ohms, both channels driven
……………………………. 125 watts into 4 ohms, both channels driven
……………………… 112 watts peak onto 8 ohms, one channel; driven
……………………….. 175 watts peak into 4 ohms, one channel driven
Damping factor: ………………………………………….. over 2000 at 1kHz
Peak current: ………………………………………………… over 16 amperes
Input Impedance: ……………………………………………….. 47,000 ohms
Input Sensitivity: …………………………………….. 1.2 volts for 75 watts
Gain: ……………………………………………… 21 voltage ratio or 26.4 dB
Frequency Response 3dB: ……………………………….. 0.6 to 100,00 Hz
Noise: ………………………………………………………. greater than 100dB
Line Section:
Frequency Response 3dB: ……………………………….. 1.5 to 250,00 Hz
Distortion: ………………………………….. IM and THD less than 0.001%
Gain: ………………………………………………………….. 3 voltage, 9.54 dB
Noise: ………………………………………………………………… over 100 dB
Moving Magnet Phono Section:
Frequency Response: ……………………… 20 to 20,000 Hz +/‐0.05 dB
Gain: ……………………………………………………………….. 33 dB at 1kHz
Noise: ………………………………………………………………….. over 80 dB
Distortion: …………………………………………………. less than 0.0001%
Headphone Section:
Power: ………………………………… 600 milliwatts onto 30 ohms peak
Functions:
Unbalanced Stereo Inputs: ………………………… 3 line, 1 phono MM,
………………………………………………………….. 1 bypass and 1 monitor
Unbalanced Stereo Outputs: …………………….. 1 speaker, 1 monitor
……………………………………………..1 preamplifier, and 1 headphone
Pushbutton and Remote Controls; ………………………. power, mute,
…………………………………………………………….. Inputs (1,2,3, Phono),
…………………………………………………………… Mon (monitor/bypass)
………………………………………………… and Volume (manual/remote)
Power Rating: ………………………………….. 120 VAC , 5.0 amp SB fuse
…………………………………………… or 200‐240 VAC, 3.15 amp SB fuse
Dimensions: …………………… 16.5″ (419 mm) W x 3.125″ (79 mm) H
……………………….. x 14″ (356 mm) D (excluding jacks and controls)
Shipping Weight: ………………………………………. 30 pounds (13.6Kg)
Warranty: …………………………………………………………………… 5 years