Low Noise Linear PSU*
Excepting for low noise internal power supply design, ARIES also comes with an external low noise linear power supply unit. This PSU is based on AURALiC Purer‐Power™ technology with advanced AC filter and very low noise circuit design. The actual measurement shows only 10uV cross 20Hz-20KHz range.
Opgraderet DC kabel til sPS-500
Stranded copper 1.345 kr.
Stranded silver 1.795 kr.
DC output on/off switch
Operating indicator LED x1
AC power input on/off switch(Rear panel)
AC power input
Voltage : 100Vac ~240Vac
Frequency : 50Hz / 60Hz
Current : 1.6A
DC power output
Voltage : 7Vdc, 9Vdc, 12Vdc, 19Vdc selectable
Voltage tolerance: ±10%
Current limit: 5A@ 7Vdc, 9Vdc, 12Vdc
Current tolerance: ±10%
Maximum output power :
Operating temperature : +10 ~ +30℃
Storage temperature : 0 ~ +40℃
Operating & storage humidity : 10% ~ 90%
106 x 48 x 230(mm)
It is designed to operate by linear circuits only it means it doesn’t use any digital circuit at all, so doesn’t generate any digital high frequency noise. Also it uses Ultra Low Noise Regulator circuit to minimize the faint noise occurred even from the linear circuit and it has the built-in Noise filter to block the noise coming from AC power.
For the stable operation, it has built-in ‘output short protection circuit’ and ‘over-temperature protection circuit’, and also ‘high performance audio components’ have been chosen through a number of experiments for the best fits.
There are all 3 power outputs; High, Mid, Low Level available on the rear panel of sPS-1000, and each output has 4steps selectable voltage, so it can make a connection with various audio devices.
- High Level output is for audio source devices like a digital media player which needs high voltage and high current as same as sMS-1000 or low power PCs.
- Mid Level output is for most audio devices which need middle voltage and middle current as like sDP-1000.
- Low Level output is for small audio devices which need low voltage and low current like dX-USB HD as even runs by USB power
sPS-1000 will present the rich and elegant sound with the increased resolution through the stable DC power, these features will cover the dry and rough sounds called as weakness of most digital audio devices have, and such these presentation will be the best feature of sPS-1000.
You will experience the incredible sonic differences when using sPS-1000 in your audio system, it will bring you a feeling of satisfaction as like using the higher level of audio device.
- High performance DC linear power supply
- Ultra Low Noise Regulator Circuit
- Output short Protection circuit
- Over-Temperature Protection Circuit
The mBPS-d2s houses two batteries. While one battery provides power, the other charges and the mBPS-d2s switches between these functions automatically. So all you ever have to do is plug it in and connect it to the device you want to power, there are also 2 types of DC power cables available, UPOCC copper cable(30cm) is including as the standard accessory.There are a series of pairs of LEDs on the unit’s front side showing output status, charge status, and low bat status. The unit is powered with an included external 9V supply that plugs into your wall outlet.